POSITION: Home -> Products -> GRPS Network Alarm Terminals -> PSTN wired&wireless alarm(backup battery)

Product Name:  PSTN wired&wireless alarm(backup battery)
Name:   PSTN wired&wireless alarm(backup battery) Model: SA-1168-UPSTEL8 
Attestation: 'CCC,CE,ROHS' Type: GRPS Network Alarm Terminals 

1. Based on PSTN telephone line transmission, the speed is far lower than tcp/ip and GPRS. We suggest you buy the alarm panel based on tcp/ip and GPRS.

2. 8 wired and 99 wireless zones. Wired and wireless detector are available like smoke/gas/door detectors, panic buttons etc.

3. With 485 module, it will be updated as bus system alarm host and expanded 999 zones.

4. When emergency, the alarm host will connect with CMS by GPRS, then auot dialer 6 alarm contact number.

5. CMS can freely arm or disarm all terminal prodcuts without any costs.

6. high-speed communcation device. Our central monitor station can quickly handle all alarm information in seconds without any costs and information jam like arm, disarm, self-checking etc.

7.intelligent auto-arm door sensor. When users close the door, the door sensor will auto arm without remote controllers to save users energy and costs.

8. Patrol record function. All guards will take a intelligent patrol controller to protect the terminal users and check whether the guard work or not at the fixed time and place because all information about guards will be auto uploaded to CMS like guard name, patroling place, time, ID number etc.

9. Without any costs, users can freely arm and disarm the whole system. When the alarm panel is in low power and damaged by others, the panel will emit high db voice and auto dial the preset contact number in the same time.

10.Learning code is easy to add or cancel any alarm accessories like door/smoke/gas/PIR sensors. After inputting correct password, the users can arm and disarm the whole system by SMS or dialing.

11.With high-quality GSM industrial moduel and lightningproof design, the alarm panel is super anti-shielding.

12.external wired warning board. To advertize and frighten the intruders, wired warning board is connected, in which LOGO and contact number from service providers can be showed.

13.UPS power supply. No matter wether AC power is off or not, the alarm host still can upload the alarm information to the CMS. 12V UPS supply power for the whole system and all wired accessories with lightningproof protection to resist co-channel interference and save batteries of wireless accessories.


alarm host size(length*breadth*height):27*26.6*8CM

power supply:AC to DC power converter input : 220V (110V and 240V are available) output: 9VDC500mA

power current:≤40mA,alarm current:≤350mA

working environment: indoor,tempreture-10 ~ 50℃,humidity≤90%,atmospheric pressure 86 ~106Kpa。

receiving distance:≥120 mts(without barriers)

telephone voice hint: operation voice reminding. For example, when users set door/PIR/smoke sensors, there is the operation voice to teach them.

alarm phone number:6, length of phone NO.:30 figure

the volume of external siren:≥110dB(without built-in siren)

working frequency:315MHz/433MHz

dual audio auto-dial single frequency: ring current 80mA 35mA 18mA, high frequency group -7dBM+3dB-7dBM-5dB -7dBM±3dB -7dBM+5dB-7dBM3dB , low frequency group: -9dBM+3dB-9dBM-5dB
HOME \ PRODUCTS \ SUPPORT \ MANUFACTRURE \ DEMO \  CONTACT Copyright 2006 © Shenzhen Security Group Corp.,Ltd.
All Rights Reserved.
上海11选5 上海11选5 上海11选5 山东11选5 山东11选5 上海11选5 山东11选5 上海11选5 上海11选5 上海11选5